Research Output 1991 2017

  • 1596 Citations
  • 20 Scopus h-Index
  • 103 Article
  • 101 Conference contribution
  • 1 Comment/debate
  • 1 Review article
Filter
Conference contribution
2016

A Pilot Study of Occupant Accommodation and Seat Belt Fit for Law Enforcement Officers

Jones, M. L. H., Ebert-Hamilton, S. & Reed, M. Apr 5 2016 SAE 2016 World Congress and Exhibition. April ed. SAE International, Vol. 2016-April

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Law enforcement
Seats
Anthropometry
Gears
Wheels

Crash impact dummies adapted to people affected by osteogenesis imperfecta

Martínez, L., Reed, M. P., García, A., De Loma-Ossorio, M., Torres, C. & Bueno, A. 2016 2016 IRCOBI Conference Proceedings - International Research Council on the Biomechanics of Injury. International Research Council on the Biomechanics of Injury, p. 768-769 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Osteogenesis Imperfecta
1 Citations

Development of an Automatic Seat-Dimension Extraction System

Park, J., Ebert-Hamilton, S., Kim, K. H., Jones, M., Park, B. K. & Reed, M. Apr 5 2016 SAE 2016 World Congress and Exhibition. April ed. SAE International, Vol. 2016-April

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Seats
Computer aided design
Benchmarking

Development of geometric specifications for the pelvis of a small female anthropomorphic test device

Klein, K. F., Reed, M. P. & Rupp, J. D. 2016 2016 IRCOBI Conference Proceedings - International Research Council on the Biomechanics of Injury. International Research Council on the Biomechanics of Injury, p. 580-581 2 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pelvis
Equipment and Supplies
Specifications

Effects of occupant and vehicle factors on three-point belt fit in rear seats

Park, J., Ebert, S. M., Reed, M. P. & Hallman, J. J. 2016 2016 IRCOBI Conference Proceedings - International Research Council on the Biomechanics of Injury. International Research Council on the Biomechanics of Injury, p. 713-722 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Body Mass Index
Seat Belts
Body Size
Thigh
Pelvis

Potential safety effects of low-mass vehicles with comprehensive crash avoidance technology

Klinich, K. D., Flannagan, C. A. C., Hu, J. & Reed, M. P. 2016 2016 IRCOBI Conference Proceedings - International Research Council on the Biomechanics of Injury. International Research Council on the Biomechanics of Injury, p. 755-764 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Technology
Safety
Wounds and Injuries
Risk Reduction Behavior
Datasets
1 Citations

Rapid Development of Diverse Human Body Models for Crash Simulations through Mesh Morphing

Hwang, E., Hallman, J., Klein, K., Rupp, J., Reed, M. & Hu, J. Apr 5 2016 SAE 2016 World Congress and Exhibition. April ed. SAE International, Vol. 2016-April

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Geometry
Personal computers
Bone
Chemical analysis
Industry

The influence of pre-existing rib fractures on GHBMC thorax response in lateral impact

Zaseck, L. W., Chen, C., Hu, J., Reed, M. P. & Rupp, J. D. 2016 2016 IRCOBI Conference Proceedings - International Research Council on the Biomechanics of Injury. International Research Council on the Biomechanics of Injury, p. 536-555 20 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Rib Fractures
Thorax
Ribs
Human Body
Biomechanical Phenomena
2015

Development of methods to assess self-reach capability

Jones, M. L. H., Kim, K. H., Ebert, S. & Reed, M. P. 2015 2015 International Annual Meeting of the Human Factors and Ergonomics Society, HFES 2015. Human Factors an Ergonomics Society Inc., Vol. 2015-January, p. 1283-1287 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

body
Armor
Gears
Logistics
Testing

Effects of driver attributes on lower abdomen contour

Reed, M. P., Park, B. K. & Hallman, J. J. 2015 2015 IRCOBI Conference Proceedings - International Research Council on the Biomechanics of Injury. International Research Council on the Biomechanics of Injury, p. 701-705 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abdomen
Body Mass Index
Lasers
Pelvis
Posture

Perceived difficulty for seated reach motions: Methodologies developed for military armor

Kim, K. H., Jones, M., Ebert, S. & Reed, M. P. 2015 2015 International Annual Meeting of the Human Factors and Ergonomics Society, HFES 2015. Human Factors an Ergonomics Society Inc., Vol. 2015-January, p. 677-680 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

body
participant
Armor
means of transport
soldier
2014

A statistical analysis of driver knee locations relative to vehicle, occupant and belt fit variables

Reed, M. P., Ebert, S. M. & Hallman, J. J. 2014 2014 IRCOBI Conference Proceedings - International Research Council on the Biomechanics of Injury. International Research Council on the Biomechanics of Injury, p. 224 1 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Statistical methods

Creating custom human avatars for ergonomic analysis using depth cameras

Reed, M. P., Park, B. K. & Kim, K. H. 2014 2014 International Annual Meeting of the Human Factors and Ergonomics Society, HFES 2014. Human Factors an Ergonomics Society Inc., Vol. 2014-January, p. 1590-1594 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

body
model
analysis
software
human being

Predicting subjective responses from human motion: Application to vehicle ingress assessment

Masoud, H. I., Reed, M. P., Paynabar, K., Wang, N., Jin, J., Wan, J., Kozak, K. K. & Gomez-Levi, G. 2014 ASME 2014 International Manufacturing Science and Engineering Conference, MSEC 2014 Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference. Web Portal ASME (American Society of Mechanical Engineers), Vol. 1

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Railroad cars
Trajectories
Ergonomics
Support vector machines
2013
1 Citations

Modeling body shape from surface landmark configurations

Reed, M. P. 2013 Digital Human Modeling and Applications in Health, Safety, Ergonomics, and Risk Management: Human Body Modeling and Ergonomics. PART 2 ed. Vol. 8026 LNCS, p. 376-383 8 p. (Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics); vol. 8026 LNCS, no. PART 2)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Model
Landmarks
Linkage
Statistical model
Angle
2012
2 Citations

A pilot study of three-dimensional child anthropometry for vehicle safety analysis

Reed, M. P. 2012 Proceedings of the Human Factors and Ergonomics Society 56th Annual Meeting, HFES 2012. p. 2326-2330 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

child
means of transport
pilot study
data
Anthropometry

A subject-specific model of human

Al-Dirini, R. M. A., Reed, M. P., Paul, G. & Thewlis, D. 2012 Advances in Applied Mechanics Research, Conference Proceedings - 7th Australasian Congress on Applied Mechanics, ACAM 2012. National Committee on Applied Mechanics, p. 191-200 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Magnetic resonance
Seats
Tissue
Bone
Oils and fats
2011

Design and testing of a child restraint for developing countries using low-technology manufacturing methods

Strauss, R., Bland, M., Biddle, A. & Reed, M. 2011 SAE 2011 World Congress and Exhibition.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Developing countries
Costs
Facings
Passenger cars
Testing

Design and testing of a child restraint for developing countries using low-technology manufacturing methods

Strauss, R., Bland, M., Biddle, A. & Reed, M. 2011 SAE 2011 World Congress and Exhibition.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Developing countries
Costs
Facings
Passenger cars
Testing

Influence of object weight and terminal orientation on upper limb postures during grasping, holding, and placing cylindrical object

Zhou, W., Armstrong, T. J., Wegner, D. M. & Reed, M. P. 2011 Proceedings of the Human Factors and Ergonomics Society 55th Annual Meeting, HFES 2011. p. 963-967 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

object
Experiments
orientation
location
subject
3 Citations

Measurement of the contour and deflection of vehicle seats for comparison with the FMVSS 213 dynamic test bench

Reed, M. P. 2011 SAE 2011 World Congress and Exhibition.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Seats
Passenger cars
Principal component analysis
Testing

Measurement of the contour and deflection of vehicle seats for comparison with the FMVSS 213 dynamic test bench

Reed, M. P. 2011 SAE 2011 World Congress and Exhibition.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Seats
Passenger cars
Principal component analysis
Testing

Understanding work task assessment sensitivity to the prediction of standing location

Wegner, D. M. & Reed, M. P. 2011 SAE 2011 World Congress and Exhibition.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Jacks
Biomechanics
Engineers
Testing
Chemical analysis

Understanding work task assessment sensitivity to the prediction of standing location

Wegner, D. M. & Reed, M. P. 2011 SAE 2011 World Congress and Exhibition.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Jacks
Biomechanics
Engineers
Testing
Chemical analysis
2010

Hand positions and forces during truck ingress

Reed, M. P., Ebert-Hamilton, S. M. & Hoffman, S. G. 2010 54th Human Factors and Ergonomics Society Annual Meeting 2010, HFES 2010. Vol. 2, p. 1097-1100 4 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

driver
data
Truck drivers
Trucks
means of transport
2 Citations

Integrating physical and cognitive human models to represent driving behavior

Fuller, H. J. A., Reed, M. P. & Liu, Y. 2010 54th Human Factors and Ergonomics Society Annual Meeting 2010, HFES 2010. Vol. 2, p. 1042-1046 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

model
human being
means of transport
traffic behavior
driver
1 Citations

The effect of bracing availability on force-exertion capability in one-hand isometric pulling tasks

Jones, M. L. H., Reed, M. P. & Chaffin, D. B. 2010 54th Human Factors and Ergonomics Society Annual Meeting 2010, HFES 2010. Vol. 2, p. 1169-1173 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

body
effect
Availability
reaction
constraint
2009

Comparison of ATD and driver knee positions

Atkinson, P., McCann, M., Reed, M. P., Srivastava, A. & Walter, N. 2009 SAE Technical Papers.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pickups
Mockups
Testing

Dynamic performance of child restraints with two-point belt securement

Loffredo, M., Arruda, C., Reed, M. & Manary, M. 2009 18th Congresso e Exposicao Internacionais da Tecnologia da Mobilidade.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citations

Modeling ascending and descending stairs using the Human Motion Simulation Framework

Reed, M. P. 2009 Digital Human Modeling for Design and Engineering Conference and Exhibition, DHM 2009.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stairs
1 Citations

Modeling variability in torso shape for chair and seat design

Reed, M. P. & Parkinson, M. B. 2009 2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008. PART A ed. Vol. 1, p. 562-570 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Seats
Principal component analysis
Decision making
Lasers
2 Citations

Simulating complex automotive assembly tasks using the HUMOSIM framework

Zhou, W., Armstrong, T. J., Reed, M. P., Hoffman, S. G. & Wegner, D. M. 2009 Digital Human Modeling for Design and Engineering Conference and Exhibition, DHM 2009.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Jacks
Productivity
1 Citations

Validation of the Human Motion Simulation Framework: Posture Prediction for standing object transfer tasks

Zhou, W. & Reed, M. P. 2009 Digital Human Modeling for Design and Engineering Conference and Exhibition, DHM 2009.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Jacks
Ergonomics
Data acquisition
2008
8 Citations

Effect of in-vehicle touch screen position on driver performance

Fuller, H., Tsimhoni, O. & Reed, M. P. 2008 52nd Human Factors and Ergonomics Society Annual Meeting, HFES 2008. Vol. 3, p. 1893-1897 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

means of transport
performance
subject
Touch screens
Simulators
3 Citations

Force-exertion postures with external bracing in industrial tasks: Data from an automotive assembly plant

Jones, M. L. H., Kirshweng, R. L., Armstrong, T. J. & Reed, M. P. 2008 52nd Human Factors and Ergonomics Society Annual Meeting, HFES 2008. Vol. 2, p. 1049-1053 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

body
worker
individual
data
video
18 Citations

Modeling variability in torso shape for chair and seat design

Reed, M. P. & Parkinson, M. B. 2008 ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE2008. PARTS A AND B ed. Vol. 1, p. 561-569 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Seats
Principal component analysis
Decision making
Lasers
Multivariate regression
5 Citations

Modeling vehicle ingress and egress using the human motion simulation framework

Reed, M. P. & Huang, S. 2008 Digital Human Modeling for Design and Engineering Conference and Exhibition.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Mockups
Hierarchical systems
Commercial vehicles
Passenger cars
Trucks

Postural behaviors during one-hand force exertions

Hoffman, S. G., Reed, M. P. & Chaffin, D. B. 2008 Digital Human Modeling for Design and Engineering Conference and Exhibition.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ergonomics
Torque
2007
5 Citations

An integrated model of gait and transition stepping for simulation of industrial workcell tasks

Reed, M. P. & Wagner, D. W. 2007 Digital Human Modeling for Design and Engineering Conference and Exhibition.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Kinematics
Inverse kinematics
Ergonomics
Redundancy
Trajectories
9 Citations

Assessing the importance of motion dynamics for ergonomic analysis of manual materials handling tasks using the anybody modeling system

Wagner, D. W., Reed, M. P. & Rasmussen, J. 2007 Digital Human Modeling for Design and Engineering Conference and Exhibition.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ergonomics
Static analysis
Materials handling
Software packages
Dynamic analysis

Distribution of computer users' eye locations based on sitter-selected postures

Gscheidle, G. & Reed, M. 2007 10th Annual Applied Ergonomics Conference: Celebrating the Past - Shaping the Future.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

workstation
computer
adaptation
location
measurement
8 Citations

Predicting force-exertion postures from task variables

Hoffman, S. G., Reed, M. P. & Chaffin, D. B. 2007 Digital Human Modeling for Design and Engineering Conference and Exhibition.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ergonomics
Statistical methods
1 Citations

Standing reach envelopes incorporating anthropometric variance and postural cost

Parkinson, M. B. & Reed, M. P. 2007 Digital Human Modeling for Design and Engineering Conference and Exhibition.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Costs
Kinematics
2 Citations

The relationship between hand force direction and posture During two-handed pushing tasks

Hoffman, S. G., Reed, M. P. & Chaffin, D. B. 2007 51st Annual Meeting of the Human Factors and Ergonomics Society, HFES 2007. Vol. 2, p. 928-932 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

body
effect
Ergonomics
determinants
job
3 Citations

The virtual driver: Integrating task planning and cognitive simulation with human movement models

Tsimhoni, O. & Reed, M. P. 2007 2007 World Congress.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Queueing networks
Ergonomics
Planning
2006
8 Citations

A task-based stepping behavior model for digital human models

Wagner, D. W., Reed, M. P. & Chaffin, D. B. 2006 Digital Human Modeling for Design and Engineering Conference.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pickups
Materials handling
Kinematics
Experiments
3 Citations

Behavior-based model of clavicle motion for simulating seated reaches

Danker, J. S. & Reed, M. P. 2006 2006 SAE World Congress.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ergonomics
Seats
Trucks
14 Citations

Comparison of child body dimensions with rear seat geometry

Huang, S. & Reed, M. P. 2006 2006 SAE World Congress.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Seats
Geometry
2 Citations

Considering driver balance capability in truck shifter design

Parkinson, M. B. & Reed, M. P. 2006 Digital Human Modeling for Design and Engineering Conference.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Trucks
Truck drivers
Wheels
13 Citations

Improved head restraint design for safety and compliance

Parkinson, M. B. & Reed, M. P. 2006 Proceedings of 2006 ASME International Design Engineering Technical Conferences and Computers and Information In Engineering Conference, DETC2006. Vol. 2006

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Seats
Kinematics
Tissue